Copyright BoMed

EXTERNAL NONINVASIVE CARDIAC OUTPUT MODULE
EXT-TEBCO

EXT-TEBCO is the blood flow measurement module placed externally to the Host System.
It is blood flow module of the tethered HOTMAN System.

EXT-TEBCO Module communicates with the host system via the USB cable (on the picture) or RS232 port (jumper switchable):

ext-t-wusb

EXT-TEBCO-USB with standard accessories. It connects to a USB port of the host system through a standard USB cable (shown in upper right hand corner) and to the patient via a patient cable (on the left of the picture). The patient cable connects to a patient through an array of 8 TEB solid gel disposable electrodes. The module is powered from a wall power source (shown above the EXT-TEBCO Module), its cable is plugged into the +5 VDC Power Connector on EXT-TEBCO. This hardware configuration has a higher price than the RS232 communication.  

 

Inside the EXT-TEBCO Module is the TEBCO OEM Module.

EXT-TEBCO SPECIFICATIONS:

Dimensions ............................5.8" x 10" x 1.2" (14.7 cm x 25.4 cm x 2.8 cm).
Color .....................................Notebook Charcoal Gray
USB Cable ............................ 6' (180 cm)
Patient Cable......................... 10' (3m)

earth5